{"title":"Digital Bird Motion Control Kits","description":"\u003cp\u003eThe full range of Digital Bird 3D printable Camera motion control system Kits. Save thousands of dollers by building your own camera motion control system.\u003c\/p\u003e","products":[{"product_id":"digital-bird-generic-main-board","title":"Digital Bird Generic Main Board version 2.0","description":"\u003cp\u003e\u003cstrong\u003e£20 OFF Multiple kit orders value over £450\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVersion 2.0 update\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYour order will supply Version 2.0 of the board which has has the following updates.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn additional I2C port for the OLED display\u003c\/li\u003e\n\u003cli\u003eAn additional Port for the second Slider Limit switch update\u003c\/li\u003e\n\u003cli\u003eThere is no need for the resistor patch on the back of the board which facilitated the use of the OLED. This is built onto the board now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Digital Bird Kits are good value for money and have been put together to make the whole project much more accessible. With the kits you can build any of the system parts in less than a day. However for those happy to find all the parts themselves this is the generic Digital Bird main board and battery harness which can be used as a base to build either the Slider, Balanced Pan Tilt ,Turntable or the jib. Everything else is left for you to supply yourself.\u003c\/p\u003e\n\u003cp\u003eTo complete the board you will need a 38pin ESP32 Development board together with one or two TMC 2208 V3.0  Stepper drivers  The Pan Tilt heads will require two the other devices only require one. Also included here are the Digital Bird NP Style battery boards. The TMC drivers should be \u003cspan data-mce-fragment=\"1\"\u003eSTEP\/DIR mode.\u003c\/span\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIf you are not experienced working with bare PCB boards or have little or no experience with Arduino projects I would strongly advise purchasing one of the kits since they will arrive fully working and tested with software installed and all the additional components required.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe TMC drivers require to be tuned to the requirements of the motor they are driving. This is performed by tuning the Vref voltage using the small screw pot on top of the driver to increase or decrees the drivers Vref voltage. To establish the current setting you need a multi meter and a small screwdriver. place the black probe from the meter onto the boards ground and the red probe against the small screw on top of the driver and  read the  Vref. For this project you will typically be driving either a Nema17 or Nema11 motor. The Vref for a \u003cstrong\u003eNema17 should be about 0.9v\u003c\/strong\u003e. For the smaller \u003cstrong\u003eNema11 this should be 0.6v\u003c\/strong\u003e Turning the screw clockwise in very small steps will reduce the value. It is important that you power the board from the battery and not through the ESP32 USB port. Also do not have a stepper motor plugged into the board when performing this task.\u003c\/p\u003e\n\u003cp\u003eNote.: Pin risers are only supplied for stepper 1 and only used when building the board to power the slider Pan head or Jib. Boards intended for use in the Pan Tilt heads  should have the drivers soldered directly to the main board since there is no space for risers on those designs. Please let me know by email  if you need the board for the mini Jib as I will not solder on the RJ45 port since it is not required and will interfere with the encoder position on that build. my email is : digitalbirdfilm@gmail.com\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eLocal Tax liabilities:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e\u003cspan\u003eDifferent countries have different Import tax systems and there may be additional import duties\/taxes applied to your order when entering your country. Payment of such tax is the responsibility of the purchaser and vary from country to country. \u003c\/span\u003e\u003c\/i\u003e\u003c\/p\u003e","brand":"Digital Bird Motion Control","offers":[{"title":"Default Title","offer_id":39733908832451,"sku":"","price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0525\/2290\/9891\/products\/GenericMainboard01.jpg?v=1620430738"},{"product_id":"ptzplus-wifi-controler","title":"PTZplus WIFI Controller","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e£20 OFF orders value over £450\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDigital Bird PTZ plus Wi-Fi controller for filmmakers. All the features you will find on the compact controller with the addition of live joystick camera control for up to three live camera systems while at the same time controlling unlimited automated camera systems set up using the A-B function or six key sequencer.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA camera system can consist of any number of Digital Bird components, for example it may be a pan tilt head mounted on a slider or simply a camera mounted on a pan tilt head and a tripod.\u003cbr data-mce-fragment=\"1\"\u003eWhatever the configuration, the PTZ plus control can control up to 4 live systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUp to 9 PTZ pre-set poses can be stored for each camera system All recorded keys and positions are stored even when the system is powered down allowing you to setup your system long before the event power it all down to save on batteries. Power it up again when required with all your setups ready to go.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe controller offers 5 input devices.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e•\u003c\/span\u003e The Nextion touch display to control system setup and all the other functions\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e•\u003c\/span\u003e A three axis joystick which controls Pan, Tilt, Slid, and on\/off function button\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e•\u003c\/span\u003e A second two axis joystick to control zoom\/focus\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e•\u003c\/span\u003e An acceleration control knob which allows you to quickly adjust how smoothly your     system performs its moves as it performs them.\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e•\u003c\/span\u003e An LED play button for more tactile control of recording.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis kit comes with all the non 3D print parts required to build the controller including\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe 2.8\" Nextion TFT display\u003c\/li\u003e\n\u003cli\u003eDigital Bird PTZplus control board\u003c\/li\u003e\n\u003cli\u003e3 axis Joystick\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eC\u003c\/span\u003eables connectors switch and screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe PTZ plus system uses the same NP style batteries used everywhere else on the system together with an external power jack for 7.5V supply. Batteries are not supplied with the kits.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eLocal Tax liabilities:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e\u003cspan\u003eDifferent countries have different Import tax systems and there may be additional import duties\/taxes applied to your order when entering your country. Payment of such tax is the responsibility of the purchaser and vary from country to country. \u003c\/span\u003e\u003c\/i\u003e\u003c\/p\u003e","brand":"Digital Bird Motion Control","offers":[{"title":"Use your own 3D printed parts","offer_id":43014524305603,"sku":"","price":140.0,"currency_code":"GBP","in_stock":true},{"title":"With 3D printed parts for casing","offer_id":43014524272835,"sku":"","price":190.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0525\/2290\/9891\/products\/PTZ01small.jpg?v=1648673868"},{"product_id":"digital-bird-balanced-pan-tilt-head","title":"Digital Bird Balanced Pan Tilt Head (WIFI)","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003e£20 OFF Multiple kit orders value over £450\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0525\/2290\/9891\/files\/Instructablesprize_480x480.jpg?v=1671018330\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis is the Digital Bird three axis balanced pan tilt head particularly useful when used on the end of a jib. part of the Digital bird 3D printable camera motion control system. The head can be used on its own or as part of the wider system. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn order to use this head you will also need a WIFI controller used to command all parts of the Digital Bird system. Only one controller is required to control all parts of the system. Please take not of the parts excluded from the kit and listed bellow.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eNo soldering or programming required the main board is plug and play.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in the kit\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectronics:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDigital Bird Mainboard with ESP32 \u0026amp; TMS drivers. pre-programed\u003c\/li\u003e\n\u003cli\u003eShutter cable 2.5mm Stereo Jack socket \u0026amp; Cable\u003c\/li\u003e\n\u003cli\u003eThumb Joystick with cable x 1\u003c\/li\u003e\n\u003cli\u003ePower Cable 210mm with DigitalBird NP Battery Terminals\u003c\/li\u003e\n\u003cli\u003eSwitch Cable 150mm with two twitches\u003c\/li\u003e\n\u003cli\u003ePower switch harness 150mm long x1\u003c\/li\u003e\n\u003cli\u003eAux power harness with 150mm cable\u003c\/li\u003e\n\u003cli\u003eOLED Display 0.49 Inch 128x32 res \u0026amp; Cable 180mm long\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eBearings and drive components:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e10x4x4 bearing x 3\u003c\/li\u003e\n\u003cli\u003e61806 2RS ZEN Sealed Deep Groove Ball Bearing 30x42x7mm x 2\u003c\/li\u003e\n\u003cli\u003e625 2RS ZEN Sealed Deep Groove Ball Bearing 5x16x5mm x1\u003c\/li\u003e\n\u003cli\u003e6811 2RS bearing 55x72x9mm x1\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGT2 6mm wide Closed loop timing belt 360mm for Tilt\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGT2 6mm wide Closed loop timing belt 200mm for Pan\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGT2 Pulley 20 Teeth 5mm bore 6mm Width for Nema17 Stepper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGT2 Pulley 16 Teeth 6mm bore 6mm Width for Nema11 Stepper\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSundries:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400; text-align: left;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSwiss Type camera L bracket min 110mm long\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eEvery nut bolt and screw required\u003c\/li\u003e\n\u003cli\u003eMagnets 8x3mm x 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe kit \u003cspan style=\"text-decoration: underline;\"\u003eexcludes\u003c\/span\u003e the following parts which you are left to source yourself.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll the other mechanical components should be available to you locally. Given the current cost of shipping heavier items internationally and the increased duty you would otherwise have to pay on the kits I believe this package will make building the system  more accessible particularly for international purchasers. Postal charges are also reduced.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003eYour own 3D printed parts \u003ca title=\"Digital Bird 3D printable professional Camera Pan Tilt Head\" href=\"http:\/\/www.thingiverse.com\/thing:5440988\" target=\"_blank\"\u003ewww.thingiverse.com\/thing:5440988\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400; text-align: left;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAndoer Quick Release Plate Clamp for Arca Swiss Tripod Ball Head Quick Release Plate\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400; text-align: left;\"\u003eSwiss plate 110mm long  \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eNewer 38 mm Screw Knob Aluminium Quick Release Clamp \u003c\/li\u003e\n\u003cli style=\"font-weight: 400; text-align: left;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eNema 11 Stepper Motor Bipolar L=51mm w\/ Gear Ratio 19:1 Planetary Gearbox\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e Part Number: 11HS20-0674S-PG19 \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e 230mm cable\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400; text-align: left;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eNema 17 Bipolar 45Ncm (63.74oz.in) 1.5A 42x42x39mm 4 Wires Part No. \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e17HS15-1504S-X or equal\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400; text-align: left;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eNP style battery\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eFocus\/zoom motor \u0026amp; WIFI Controllers are separate kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eLocal Tax liabilities:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e\u003cspan\u003eDifferent countries have different Import tax systems and there may be additional import duties\/taxes applied to your order when entering your country. Payment of such tax is the responsibility of the purchaser and vary from country to country. \u003c\/span\u003e\u003c\/i\u003e\u003c\/p\u003e","brand":"Digital Bird Motion Control","offers":[{"title":"Default Title","offer_id":42023906410691,"sku":"","price":210.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0525\/2290\/9891\/products\/BalancedPT_01.jpg?v=1659351150"},{"product_id":"digital-pan-head-video-turntable","title":"Digital Pan head\/Video turntable","description":"\u003cp\u003e\u003cstrong\u003e£20 OFF Multiple kit orders value over £450\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit is for the Digital Bird Pan Head \/ video turntable and any other use you can put a digital pan motor to! The head is controlled using one of the two available Digital Bird WIFI controllers and can be used independently or as parts of the digital bird 3D printable camera motion control system. With camera shutter control built in this head is also perfect for photogrammetry workflow. The head can also be used to provide a second pan axis to the mini Jib. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNEW- Don't own a 3D printer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe know offer the hardware kit together with all the 3D printed parts ready to go with any metal threaded inserts already installed. 3D parts are printed to a high standard in Matt PLA for considerably less than you will pay at a typical 3D print farm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe kits\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003eexcludes\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ethe following parts which you are left to source yourself.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eNema 17 Bipolar 45Ncm (63.74oz.in) 1.5A 42x42x39mm 4 Wires Part No. \u003c\/span\u003e\u003cspan\u003e17HS15-1504S-X\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNP style battery\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eYou will also need one of the Digital bird WIFI controllers to program the system. This is available as a separate kit. Only one controller is required to control the complete Digital Bird system.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEverything else is included. No soldering or programming required the main board is plug and play.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eLocal Tax liabilities:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e\u003cspan\u003eDifferent countries have different Import tax systems and there may be additional import duties\/taxes applied to your order when entering your country. Payment of such tax is the responsibility of the purchaser and vary from country to country. \u003c\/span\u003e\u003c\/i\u003e\u003c\/p\u003e","brand":"Digital Bird Motion Control","offers":[{"title":"Electronics and hardware kit","offer_id":43127589601475,"sku":"","price":160.0,"currency_code":"GBP","in_stock":true},{"title":"Electronics hardware with 3D Printed parts","offer_id":43127589634243,"sku":"","price":250.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0525\/2290\/9891\/products\/Turntable_03.jpg?v=1668608766"},{"product_id":"digital-bird-slider-electronics-fixings-kit","title":"Digital Bird Slider Kit","description":"\u003cp\u003e\u003cstrong\u003e£20 OFF Multiple kit orders value over £450\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNew: If you don't own a 3D printer the kit can now be purchased with all the 3D print parts required to build the slider. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease remember you will also require a Digital Bird Controller of your choice. Only one controller is required to control multiple systems and are available as separate kits.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the slider is shown with a 500mm rail it can be built with a much longer rail provided you understand rails greater than 500mm long will not be practical to use in duel action mode since the cantilever of the arm will be to much for the payloads involved. One line of the code needs to be edited in order to set the new rail length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOperating modes:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA-B straight run\u003c\/li\u003e\n\u003cli\u003eA-B with acceleration controls (ramp\/Ease)\u003c\/li\u003e\n\u003cli\u003eA-B-A Bounce mode\u003c\/li\u003e\n\u003cli\u003eTimelapse mode with built in intervalometer and camera shutter control\u003c\/li\u003e\n\u003cli\u003eSix key sequencer allowing you to set up to six move positions\u003c\/li\u003e\n\u003cli\u003eStop Motion function\u003c\/li\u003e\n\u003cli\u003ePTZplus for real time control of up to 4 camera systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA choice of two wifi controllers (compact or PTZplus)\u003c\/li\u003e\n\u003cli\u003eDuel or single action slide\u003c\/li\u003e\n\u003cli\u003eHot swappable Sony NP style batteries\u003c\/li\u003e\n\u003cli\u003eLimit switch for automatic setup\u003c\/li\u003e\n\u003cli\u003eVertical lifting capability (up to 4KG using counter weights on lower carriage)\u003c\/li\u003e\n\u003cli\u003eSuper silent stepper drivers provide smooth quiet operation in micro stepping mode.\u003c\/li\u003e\n\u003cli\u003eMagnetic encoder allows hand positioning of the camera.\u003c\/li\u003e\n\u003cli\u003eLocking mechanism for ease of transportation.\u003c\/li\u003e\n\u003cli\u003eCompact mono rail with no belts in open space to snag.\u003c\/li\u003e\n\u003cli\u003eFlip out telescopic feet for speedy setup in single action slide mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe kit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDigital Bird Main board pre-programed\u003c\/li\u003e\n\u003cli\u003eNP style battery harness\u003c\/li\u003e\n\u003cli\u003ePower Cable\u003c\/li\u003e\n\u003cli\u003eLimit switches\u003c\/li\u003e\n\u003cli\u003eEncoder with magnet\u003c\/li\u003e\n\u003cli\u003e2.5mm camera shutter Jack\u003c\/li\u003e\n\u003cli\u003eSmall OLED display for battery monitoring\u003c\/li\u003e\n\u003cli\u003eNeoprene Rubber for feet\u003c\/li\u003e\n\u003cli\u003eCamera screw\u003c\/li\u003e\n\u003cli\u003eBubble level\u003c\/li\u003e\n\u003cli\u003eGT2 Timing belt and pully set\u003c\/li\u003e\n\u003cli\u003eStepper vibration damper\u003c\/li\u003e\n\u003cli\u003eNema17 stepper\u003c\/li\u003e\n\u003cli\u003eNeodymium Magnets 8x3mm   x22\u003c\/li\u003e\n\u003cli\u003e120mm long camera swiss plate\u003c\/li\u003e\n\u003cli\u003eFixings kit (every nut bolt and screw required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eItems \u003cspan style=\"text-decoration: underline;\"\u003eNot\u003c\/span\u003e included in the kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAll the other mechanical components should be available to you locally. Given the current cost of shipping heavier items internationally and the increased duty you would otherwise have to pay on the kits I believe this package will make building the system  more accessible particularly for international purchasers. Postal charges have also been reduced.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e20x40mm Vslot aluminium rail 500mm long Taped each end for M5 bolts x1\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMini gantry plates 6mm thick aluminium x4\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003eNP style batteries\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eYour choice of Digital Bird Controller. (Kits available here separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eLocal Tax liabilities:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e\u003cspan\u003eDifferent countries have different Import tax systems and there may be additional import duties\/taxes applied to your order when entering your country. Payment of such tax is the responsibility of the purchaser and vary from country to country. \u003c\/span\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Digital Bird Motion Control","offers":[{"title":"Electronics and fixings only (Excluding rail and mini gantry plates)","offer_id":43112101380291,"sku":"","price":210.0,"currency_code":"GBP","in_stock":true},{"title":"Electronics Fixings \u0026 3D printed parts kit (Excluding rail and mini gantry Plates)","offer_id":43112101413059,"sku":"","price":350.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0525\/2290\/9891\/products\/Slider-SQ_7082538a-305e-4cbf-ab71-6a71af962136.jpg?v=1668559293"},{"product_id":"digital-bird-mini-jib","title":"Digital Bird Mini Jib","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e£20 OFF Multiple kit orders value over £450\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Digital Bird DIY 3D printable Mini Jib offers smooth near silent operation combined with range of exciting new camera moves not easily achieved with the slider. The Jib connects wirelessly with all the other parts of the Digital Bird camera motion control system offering you limitless possibilities for finding the perfect shot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNote: The Pan Tilt head and Pan heads shown in the image together with a required WIFI controller are separate kits not included with the Jib kit.This listing is for the basic Jib only.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eWIFI only control\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease also note that while the DB3 head can be controlled using VISCA wired connection currently the JIB is WIFI only control. This is because there are no VISCA commands for controlling anything other than PTZ heads either in applications like OBS or in the VISCA protocol itself. Only the Digital Bird WIFI controller can control complex systems such as a PTZ head on a Jib with a Pan head. This is a limitation of VISCA\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"ThingPage__description--14TtH\"\u003e\n\u003ch3\u003eFeatures:\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTypically up to 550mm of Jib Travel more with lighter payloads.\u003c\/li\u003e\n\u003cli\u003eVertical, horizontal \u0026amp; diagonal motion.\u003c\/li\u003e\n\u003cli\u003eCamera head can be mounted Upright or under slung.\u003c\/li\u003e\n\u003cli\u003eDigital Bird Pan Head adds second axis for pan control.\u003c\/li\u003e\n\u003cli\u003eTested on payloads up to 4KG (Camera and pan Tilt head)\u003c\/li\u003e\n\u003cli\u003eSony NP style batteries with 7.5v external power port\u003c\/li\u003e\n\u003cli\u003eFull feature interface though Digital Bird compact WIFI remote or PTZ remote\u003c\/li\u003e\n\u003cli\u003eOLED battery monitor and PTZ slave ID\u003c\/li\u003e\n\u003cli\u003eCamera shutter control\u003c\/li\u003e\n\u003cli\u003eLinks in wirelessly with all the other Digital Bird devices.\u003c\/li\u003e\n\u003cli\u003eUltra quiet operation.\u003c\/li\u003e\n\u003cli\u003eSilky smooth motion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOperating modes:\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA-B straight run\u003c\/li\u003e\n\u003cli\u003eA-B with acceleration controls (ramp\/Ease)\u003c\/li\u003e\n\u003cli\u003eA-B-A Bounce mode\u003c\/li\u003e\n\u003cli\u003eTime-lapse mode with built in intervalometer and camera shutter control.\u003c\/li\u003e\n\u003cli\u003eSix key sequencer for more complex moves.\u003c\/li\u003e\n\u003cli\u003eStop motion functions for animators.\u003c\/li\u003e\n\u003cli\u003ePTZplus real-time camera functions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan id=\"Post-Printing\" class=\"ThingPage__redirectTitle--xqftm\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"ThingPage__preHistory--312bi\"\u003e\n\u003ch3 class=\"ThingPage__blockTitle--3ZdLu\"\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch2 class=\"ThingPage__blockTitle--3ZdLu\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eThis mini Jib kit includes\u003c\/span\u003e\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eElectronics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDigital Bird Mainboard with ESP32 and one TMS2208 V3\u003c\/li\u003e\n\u003cli\u003eShutter cable 2.5mm Stereo Jack socket \u0026amp; Cable\u003c\/li\u003e\n\u003cli\u003ePower Cable 210mm with Digital Bird NP Battery Terminals\u003c\/li\u003e\n\u003cli\u003ePower switch harness 150mm long \u003c\/li\u003e\n\u003cli\u003eAux power harness with 150mm cable\u003c\/li\u003e\n\u003cli\u003eOLED Display 0.49 Inch 128x32 res \u0026amp; Cable 180mm long\u003c\/li\u003e\n\u003cli\u003eAS5600 Encoder with Diametrically Magnetized Magnet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBearings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-2\"\u003e5x16x5mm        x6\u003c\/li\u003e\n\u003cli class=\"ql-indent-2\"\u003e20x27x4mm      x5\u003c\/li\u003e\n\u003cli class=\"ql-indent-2\"\u003e30x42x7            x2\u003c\/li\u003e\n\u003cli class=\"ql-indent-2\"\u003e55x72x9mm      x1\u003c\/li\u003e\n\u003cli\u003eDrive Components:\u003c\/li\u003e\n\u003cli\u003e20T 5mm bore GT2 Timing pulley for 6mm belt\u003c\/li\u003e\n\u003cli\u003e200mm GT2 Closed loop timing belt 6mm wide\u003c\/li\u003e\n\u003cli\u003eDamper cartridge pre packed with damper grease. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNuts Bolts \u0026amp; Screws\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e Complete pack of every nut bolt and screw required to build the jib. Including Camera screws and adapters.\u003c\/li\u003e\n\u003cli\u003e32mm Rose Clamping plates     x2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eThe kit\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003eexcludes\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ethe following parts which you are left for to source yourself.\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eYour own 3D printed parts \u003ca href=\"https:\/\/www.thingiverse.com\/thing:5658317\" title=\"https:\/\/www.thingiverse.com\/thing:5658317\"\u003ehttps:\/\/www.thingiverse.com\/thing:5658317\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Torque Nema17 Bipolar 45Ncm (63.74oz.in) 1.5A 42x42x39mm 4 Wires Part No. 17HS15-1504S-X or equal\u003c\/li\u003e\n\u003cli\u003eTelescopic Tripod Legs for jib arm (see Tripod Options)\u003c\/li\u003e\n\u003cli\u003eNP  battery\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 No. 100mm long swiss Plate\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1No. 120mm Swiss Clamp\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eA Digital Bird WIFI controller is required to operate the Jib. Sold here as a separate kit.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCounter weights:\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eCounter weights required depend on your payload but I would suggest:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3No. 60x10x120mm long mild steel bar stock (approx. 500g each)\u003c\/li\u003e\n\u003cli\u003e2No. 60x20x120mm long mild steel bar stock (approx. 1kg each)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eor\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3No. 60x20x120mm long mild steel bar stock (approx. 1kg each)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are these parts excluded?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll the excluded mechanical components should be available to you locally. Given the current cost of shipping heavier items internationally and the increased duty you would otherwise have to pay on the kits I believe this package will make building the system more accessible particularly for international purchasers. Postal charges are also reduced.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eLocal Tax liabilities:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e\u003cspan\u003eDifferent countries have different Import tax systems and there may be additional import duties\/taxes applied to your order when entering your country. Payment of such tax is the responsibility of the purchaser and vary from country to country. \u003c\/span\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Digital Bird Motion Control","offers":[{"title":"Default Title","offer_id":42247028572355,"sku":"","price":300.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0525\/2290\/9891\/products\/MJCoverSQ.jpg?v=1674672901"},{"product_id":"db3-wifi-visca-pan-tilt-head","title":"DB3 Four axis Pan Tilt Head (WIFI \u0026 VISCA with POE or WIFI only)","description":"\u003cp\u003e\u003cstrong\u003e£20 OFF Multiple kit orders value over £450\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelect from  variants depending on your needs :\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003eWith WIFI, VISCA and POE support\u003c\/strong\u003e for wired network use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003eWIFI only\u003c\/strong\u003e (No VISCA or POE support in base)\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003eFully Pre Built\u003c\/strong\u003e with WIFI \u0026amp; VISCA support (Controller not Included here)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cb\u003eDon't have a 3D printer? \u003c\/b\u003e\u003ca href=\"https:\/\/digital-bird-motion-control.myshopify.com\/collections\/frontpage\/products\/db3-3d-printed-parts-kit-new\" title=\"DB3 3D Printed parts kit\"\u003eYou can find the 3D printed parts kit here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout: \u003cspan style=\"font-weight: 400;\"\u003e \u003c\/span\u003eThe all new  3D printable DB3 Pan Tilt head.\u003cspan style=\"font-weight: 400;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDeveloped on the back of the very successful DB Balanced head these new heads take the system to a whole new level with some pro features you won't find on any other head for less than $3000 so you can build four for the price of one consumer ready unit! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eUnlike other PTZ heads with fixed cameras and lenses these heads are designed for much wider use cases. Tested up to 4kg payloads it is Ideal for medium sized camera systems including mirrorless systems like the Sony A series and Block style cameras like the Panasonic DC-BGH1 \u0026amp; BS1H or the Z CAM range.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eNote: To use this head y\u003c\/strong\u003e\u003cb\u003eou will also need to build the Digital Bird PTZ WIFI controller along with Zoom\/Focus motors as required. These are not included here but must purchased as separate kits.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePre-Built option does not include batteries and again WIFI controller along with Zoom\/Focus motors are separate orders not included here .\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eNew key features on the DB3 :\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 axis support . \u003c\/strong\u003eThe new main board offers an additional 4th axis allowing us to drive both a focus and zoom or Iris ring at the same time. Ideal for cinema lenses but if they are way outside your budget check out the vintage  lenses like the Leica R zooms for under £400 used.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEncoders on all 4 axis. \u003c\/strong\u003eThis allows you to manually position the head for more intuitive key point positioning. Note you can still use the joystick on the PTZ WIFI controller to set key points if preferred.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMore and less speed. \u003c\/strong\u003eThe tilt motor now uses a 1:5 gearbox to better keep up with the pan for faster PTZ applications. With version six of the PTZ firmware the head can also be tuned to move extremely slowly for those long focal length shots.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront and rear tally lights. \u003c\/strong\u003eInform your talent which camera is live or coming next. This feature can be turned off if you're working on  product videos where reflections could be a problem. \u003ci style=\"font-size: 0.875rem;\"\u003e\u003cspan\u003e*Currently onboard tally lights are only supported by vMix and the WIFI PTZ functions however I am hopeful this will be added to OBS in the future.\u003c\/span\u003e\u003c\/i\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic homing at start-up. \u003c\/strong\u003eBoth variants now offer automatic homing of the Pan \u0026amp; Tilt at start-up giving us more confidence that the stored positions will be accurate after power cycling the head.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired VISCA and POE+ support. \u003c\/strong\u003eThis head offers all the same WIFI capabilities of previous designs but with the added support for wired ethernet and POE+ power. This allows multiple heads to be managed by both OBS and vMix over a POE switch. The head can also be controlled using the PTZ Optics \"Superjoy\" \u003ci style=\"font-size: 0.875rem;\"\u003e\u003cspan\u003e*Note the head should work with other VISCA PTZ controllers supporting VISCA over UDP however no others have been tested to date and no guarantees can be given.\u003c\/span\u003e\u003c\/i\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional cable management. \u003c\/strong\u003eThe fixed base on the VISCA model allows for both HDMI and SDI passthrough ensuring that your long cables do not spin around with the head.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e16 position memory. \u003c\/b\u003e16 position onboard PTZ memory using OBS. (Unlimited using vMix since the positions are stored in vMix not the head.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cb\u003eMultiple  power options. \u003c\/b\u003e\u003c\/b\u003eThe head is equipped with a 7.5v barrel DC output supplied by POE and or the battery port.  Different camera systems have differing power requirements. The POE power can provide up to 12v 2A or 30W of power which must be shared across the head, If  your system requires more power than can be provided by the POE alone you can add the 7.5-14v Aux power supplied through the lower D-Tap port to provide more watts to power both the head and the camera system through the upper D-Tap port. Typical external power supplies would be either a power adapter typically 12v 60W plus. or a V-Mount Battery pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNew from May 2025\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003eImproved base electronics layout. Added half press focus from main joystick button when in PTZ mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eWIFI Motion Control features include:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eA-B straight run\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eA-B with acceleration controls (ramp\/Ease)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eA-B-A Bounce mode\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eTime-lapse mode with built in intervalometer and camera shutter control.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSix key sequencer for more complex moves.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eStop motion functions for animators.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePTZplus WIFI real-time camera functions for up to 4 camera systems with 9 presets available for each camera system. (Remember a camera system may be simply a head on its own or it could be a head on a slider or the head on a jib all controlled as a single system.)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eIncluded in this kit:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eElectronics:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDigital Bird PTZ 5.0 Mainboard with ESP32 \u0026amp; TMS drivers. pre-programed\u003c\/li\u003e\n\u003cli\u003e2.5mm Stereo Jack socket \u0026amp; Cable for camera start stop\u003c\/li\u003e\n\u003cli\u003eAS5600 Encoders x2 with Magnets\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower Cable 210mm with DigitalBird NP Battery Terminals\u003c\/li\u003e\n\u003cli\u003ePower switch harness 150mm long x1\u003c\/li\u003e\n\u003cli\u003eAux power harness with D-Tap and power regulator.\u003c\/li\u003e\n\u003cli\u003eOLED Display 0.49 Inch 128x32 res \u0026amp; Cable 180mm long\u003c\/li\u003e\n\u003cli\u003e12v 2A POE splitter\u003c\/li\u003e\n\u003cli\u003eWt32 eith01 processor Pre-programmed\u003c\/li\u003e\n\u003cli\u003eHDMI, SDI,UART,D-Tap cable harness\u003c\/li\u003e\n\u003cli\u003eFTDI board\u003c\/li\u003e\n\u003cli\u003eBuck converters x2\u003c\/li\u003e\n\u003cli\u003eTally light harness\u003c\/li\u003e\n\u003cli\u003eReed switches with magnets for homing x2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eBearings and drive components:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e10x4x4 bearing x 2\u003c\/li\u003e\n\u003cli\u003e61806 2RS ZEN Sealed Deep Groove Ball Bearing 30x42x7mm x 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e6001 2RS Sealed Deep Groove Ball Bearing 12x28x8mm\u003c\/span\u003e x1\u003c\/li\u003e\n\u003cli\u003e6811 2RS bearing 55x72x9mm x1\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGT2 6mm wide Closed loop timing belt 360mm for Tilt\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGT2 6mm wide Closed loop timing belt 200mm for Pan\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGT2 Pulley 16 Teeth 5mm bore 6mm Width for Nema17 Stepper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eGT2 Pulley 16 Teeth 6mm bore 6mm Width for Nema11 Stepper\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMotors\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eNema 11 Stepper Motor Bipolar L=51mm w\/ Gear Ratio 5:1 Planetary Gearbox\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e Part Number: \u003cspan\u003e11HS20-0674S-PG5\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400; text-align: left;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eNema 17 Bipolar 45Ncm (63.74oz.in) 1.5A 42x42x39mm 4 Wires \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSundries:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan class=\"a-size-large product-title-word-break\" id=\"productTitle\"\u003eHaoge\u003c\/span\u003e camera L bracket. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-size-large a-spacing-none\"\u003e\u003cspan class=\"a-size-large product-title-word-break\" id=\"productTitle\"\u003eHaoge CP-58 58mm Screw Knob Quick Release Clamp \u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-size-large a-spacing-none\"\u003e\n\u003cspan class=\"a-size-large product-title-word-break\" id=\"productTitle\"\u003e\u003c\/span\u003e\u003cspan class=\"a-size-large product-title-word-break\" id=\"productTitle\"\u003e\u003c\/span\u003eEvery nut bolt and screw required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe kit\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003eexcludes\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ethe following parts which you are left to source yourself.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003eYour own 3D printed parts \u003ca href=\"https:\/\/digital-bird-motion-control.myshopify.com\/collections\/frontpage\/products\/db3-3d-printed-parts-kit-new\"\u003eor add the 3D printed parts kit here\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400; text-align: left;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eCamera Quick Release clamps and plates are camera setup specific and left to you. Only the L bracket and circular Tilt Clamp are supplied.\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400; text-align: left;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eNP style battery\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eFocus\/zoom motor \u0026amp; WIFI Controllers are separate kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eLocal Tax liabilities:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e\u003cspan\u003eDifferent countries have different Import tax systems and there may be additional import duties\/taxes applied to your order when entering your country. Payment of such tax is the responsibility of the purchaser and vary from country to country. \u003c\/span\u003e\u003c\/i\u003e\u003c\/p\u003e","brand":"Digital Bird Motion Control","offers":[{"title":"WIFI ONLY (No VISCA or POE support in base)","offer_id":42590813159619,"sku":"","price":395.0,"currency_code":"GBP","in_stock":true},{"title":"With WIFI, VISCA and POE support for OBS \u0026 vMix","offer_id":42590815158467,"sku":"","price":462.0,"currency_code":"GBP","in_stock":true},{"title":"Fully Built -with WIFI \u0026 Visca support","offer_id":43958826107075,"sku":"","price":740.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0525\/2290\/9891\/files\/DB3_02.jpg?v=1687539068"},{"product_id":"digital-bird-focus-motor-mark-iii","title":"Digital Bird Focus Motor Mark III","description":"\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis is mark3 of the Digital Bird focus motor designed to work with any of the Digital Bird 3D printable Pan Tilt heads. This new design is slimmer, simpler to build and has more torque than the previous models largely down to its new 1 to 4.4 gear set. If you have built one of the previous models you can re-use the main control board but you will need to purchase a new motor since this model uses the motor support tabs we removed on earlier versions! Sorry\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFunctionally it works just the same as previous versions but is more capable of moving those stubborn heavy zoom rings on larger photography lenses and has as slim a profile as the motor will allow.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAs before there are Left and right hand versions of the parts so you can build the versions which suit your particular camera setup. My Sony A7iii setup for example requires one on each side of the lens for focus and zoom so I use one LH one RH.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNote: There should be no problem using this new design along side earlier versions you may have already built.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBuild instructions and 3D Print files can be found here: \u003ca title=\"Digital Bird Focus motor kit\" href=\"https:\/\/www.instructables.com\/Digital-Bird-Focus-Motor-Mark-III\/\"\u003eMarkIII Focus Motor\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThe Kit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRound Nema 14 Motor, pre fitted with gears \u003c\/li\u003e\n\u003cli\u003eDigital Bird Focus drive board\u003c\/li\u003e\n\u003cli\u003e15mm carbon fibre tube\u003c\/li\u003e\n\u003cli\u003eRJ45 cable\u003c\/li\u003e\n\u003cli\u003eEvery nut and bolt required for the build\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOptions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo options with or without 3D printed parts for casing. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e£20 OFF Multiple kit orders value over £450\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eLocal Tax liabilities:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci data-mce-fragment=\"1\"\u003eDifferent countries have different Import tax systems and there may be additional import duties\/taxes applied to your order when entering your country. Payment of such tax is the responsibility of the purchaser and vary from country to country. \u003c\/i\u003e\u003c\/p\u003e","brand":"Digital Bird Motion Control","offers":[{"title":"Mark III (Use your own 3D printed parts)","offer_id":43014518014147,"sku":"","price":80.0,"currency_code":"GBP","in_stock":true},{"title":"Mark III (With the 3D print parts included)","offer_id":43014517981379,"sku":"","price":100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0525\/2290\/9891\/files\/Mark3_1.jpg?v=1711024586"},{"product_id":"db3-3d-printed-parts-kit-new","title":"DB3 3D Printed parts kit (NEW)","description":"\u003cp\u003e\u003cstrong\u003e£20 OFF Multiple kit orders value over £450\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIf you don't own a 3D printer we can send you all the parts required to build the DB3 4 axis PTZ head at a price you will not match from any 3D print shop.\u003c\/p\u003e\n\u003cp\u003eDB3 3D printed parts kit comes with all the 3D print parts you need to build the DB3 4 axis pan Tilt head. \u003cspan style=\"font-size: 0.875rem;\"\u003eAll the parts are printed to a high standard using Matt PLA for best appearance. Any parts which require metal threaded inserts will come with them pre-installed.\u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis kit is for the 3D printed parts only.\u003c\/strong\u003e The non 3D print parts kit including all fixings and electronics is a separate kit which can be found here: \u003ca title=\"DB3 Hardware Kit\" href=\"https:\/\/digital-bird-motion-control.myshopify.com\/collections\/frontpage\/products\/db3-wifi-visca-pan-tilt-head\"\u003eDB3 Hardware Kit\u003c\/a\u003e\u003c\/p\u003e","brand":"Digital Bird Motion Control","offers":[{"title":"Default Title","offer_id":43958706503875,"sku":"","price":170.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0525\/2290\/9891\/files\/3DPartskit.jpg?v=1712576014"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0525\/2290\/9891\/collections\/Slider.jpg?v=1609240145","url":"https:\/\/digital-bird-motion-control.myshopify.com\/en-jp\/collections\/frontpage\/pan-tilt-head-pcb.oembed?page=2","provider":"Digital Bird Motion Control","version":"1.0","type":"link"}