£20 OFF Multiple kit orders value over £350
This is the Digital Bird three axis balanced pan tilt head particularly useful when used on the end of a jib. part of the Digital bird 3D printable camera motion control system. The head can be used on its own or as part of the wider system.
In order to use this head you will also need one of the two WIFI controllers used to command all parts of the Digital Bird system. Only one controller is required.
No soldering or programming required the main board is plug and play.
Included in the kit
Electronics:
- Digital Bird Mainboard with ESP32 & TMS drivers. pre-programed
- Shutter cable 2.5mm Stereo Jack socket & Cable
- Thumb Joystick with cable x 1
- Power Cable 210mm with DigitalBird NP Battery Terminals
- Switch Cable 150mm with two twitches
- Power switch harness 150mm long x1
- Aux power harness with 150mm cable
- OLED Display 0.49 Inch 128x32 res & Cable 180mm long
Bearings and drive components:
- 10x4x4 bearing x 3
- 61806 2RS ZEN Sealed Deep Groove Ball Bearing 30x42x7mm x 2
- 625 2RS ZEN Sealed Deep Groove Ball Bearing 5x16x5mm x1
- 6811 2RS bearing 55x72x9mm x1
- GT2 6mm wide Closed loop timing belt 360mm for Tilt
- GT2 6mm wide Closed loop timing belt 200mm for Pan
- GT2 Pulley 20 Teeth 5mm bore 6mm Width for Nema17 Stepper
- GT2 Pulley 16 Teeth 6mm bore 6mm Width for Nema11 Stepper
Sundries:
- Swiss Type camera L bracket min 110mm long
- Every nut bolt and screw required
- Magnets 8x3mm x 3
The kit excludes the following parts which you are left to source yourself.
All the other mechanical components should be available to you locally. Given the current cost of shipping heavier items internationally and the increased duty you would otherwise have to pay on the kits I believe this package will make building the system more accessible particularly for international purchasers. Postal charges are also reduced.
- Your own 3D printed parts www.thingiverse.com/thing:5440988
- Andoer Quick Release Plate Clamp for Arca Swiss Tripod Ball Head Quick Release Plate
- Swiss plate 110mm long
- Newer 38 mm Screw Knob Aluminium Quick Release Clamp
- Nema 11 Stepper Motor Bipolar L=51mm w/ Gear Ratio 19:1 Planetary Gearbox Part Number: 11HS20-0674S-PG19 230mm cable
- Nema 17 Bipolar 45Ncm (63.74oz.in) 1.5A 42x42x39mm 4 Wires Part No. 17HS15-1504S-X or equal
- NP style battery
- Focus/zoom motor & WIFI Controllers are separate kits.
Local Tax liabilities:
Different countries have different Import tax systems and there may be additional import duties/taxes applied to your order when entering your country. Payment of such tax is the responsibility of the purchaser and vary from country to country.