£20 OFF Multiple kit orders value over £350
New: If you don't own a 3D printer the kit can now be purchased with all the 3D print parts required to build the slider.
Please remember you will also require a Digital Bird Controller of your choice. Only one controller is required to control multiple systems and are available as separate kits.
While the slider is shown with a 500mm rail it can be built with a much longer rail provided you understand rails greater than 500mm long will not be practical to use in duel action mode since the cantilever of the arm will be to much for the payloads involved. One line of the code needs to be edited in order to set the new rail length.
Operating modes:
- A-B straight run
- A-B with acceleration controls (ramp/Ease)
- A-B-A Bounce mode
- Timelapse mode with built in intervalometer and camera shutter control
- Six key sequencer allowing you to set up to six move positions
- Stop Motion function
- PTZplus for real time control of up to 4 camera systems
Features:
- A choice of two wifi controllers (compact or PTZplus)
- Duel or single action slide
- Hot swappable Sony NP style batteries
- Limit switch for automatic setup
- Vertical lifting capability (up to 4KG using counter weights on lower carriage)
- Super silent stepper drivers provide smooth quiet operation in micro stepping mode.
- Magnetic encoder allows hand positioning of the camera.
- Locking mechanism for ease of transportation.
- Compact mono rail with no belts in open space to snag.
- Flip out telescopic feet for speedy setup in single action slide mode
The kit includes:
- Digital Bird Main board pre-programed
- NP style battery harness
- Power Cable
- Limit switches
- Encoder with magnet
- 2.5mm camera shutter Jack
- Small OLED display for battery monitoring
- Neoprene Rubber for feet
- Camera screw
- Bubble level
- GT2 Timing belt and pully set
- Stepper vibration damper
- Nema17 stepper
- Neodymium Magnets 8x3mm x22
- 120mm long camera swiss plate
- Fixings kit (every nut bolt and screw required)
Items Not included in the kit:
All the other mechanical components should be available to you locally. Given the current cost of shipping heavier items internationally and the increased duty you would otherwise have to pay on the kits I believe this package will make building the system more accessible particularly for international purchasers. Postal charges have also been reduced.
-
20x40mm Vslot aluminium rail 500mm long Taped each end for M5 bolts x1
- Mini gantry plates 6mm thick aluminium x4
-
NP style batteries
- Your choice of Digital Bird Controller. (Kits available here separately)
Local Tax liabilities:
Different countries have different Import tax systems and there may be additional import duties/taxes applied to your order when entering your country. Payment of such tax is the responsibility of the purchaser and vary from country to country.